TP TUNING LLC -

45 Degree AN to Hose Barb Fitting - Black

45 degree AN to Hose Fitting - Reusable - Black

90 Degree AN to Hose Barb Fitting - Black

90 degree AN to Hose Fitting - Reusable - Black

AN Straight to Hose Barb - Black

AN Straight to Hose - Reusable - Black

O-ring to AN Fitting

O-ring to AN Fitting

-10AN Aluminum Male Weld Bung (5/8 inch Register, 7/8 inch OD)

45 Degree AN to Hose Barb Fitting - Black

45 degree AN to Hose Fitting - Reusable - Black

90 Degree AN to Hose Barb Fitting - Black

90 degree AN to Hose Fitting - Reusable - Black

AN Straight to Hose Barb - Black

AN Straight to Hose - Reusable - Black

O-ring to AN Fitting

45 Degree AN to Hose Barb Fitting - Black

45 degree AN to Hose Fitting - Reusable - Black

90 Degree AN to Hose Barb Fitting - Black

90 degree AN to Hose Fitting - Reusable - Black

AN Straight to Hose Barb - Black

AN Straight to Hose - Reusable - Black

O-ring to AN Fitting

45 Degree AN to Hose Barb Fitting - Black

45 degree AN to Hose Fitting - Reusable - Black

90 Degree AN to Hose Barb Fitting - Black

90 degree AN to Hose Fitting - Reusable - Black

AN Straight to Hose Barb - Black

AN Straight to Hose - Reusable - Black

O-ring to AN Fitting

-8AN Aluminum Male Weld Bung (1/2 inch Register, 3/4 inch OD)

This T4 Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra 1.0 inch or 1.5 inch of elevation out of the valley is required, although it could be used in any T4 application.

Note: A T4 gasket should be used on the top and bottom of the spacer to provide a proper seal.

This T4 Spacer is designed for use with T4 Turbos installed on Duramax engines when an extra 1.0 inch or 1.5 inch of elevation out of the valley is required, although it could be used in any T4 application.

Note: A T4 gasket should be used on the top and bottom of the spacer to provide a proper seal.

Billet 6061 Aluminum Universal Block Off Plugs

1/2 Inch CP3 Feed Fitting - High quality stainless steel fitting designed to allow for increased fuel feed capacity to the CP3.

Features:

• 1/2 Inch Barbed Inlet
• Made from high quality 316 Stainless Steel
• Includes sealing washer

NPT Hex Socket Plug - Black

NPT Hex Socket Plug - Black

Take the hassle out of drilling and tapping with the XDP 1/8 inch NPT Drill and Tap Kit XD196. Not having the right tools, or having to go find them, can waste a ton of time and really put a damper on the install of your newest upgrade. Installing a pyrometer probe to measure your exhaust gas temperatures?

Installing a nozzle for your new nitrous or water-meth injection system? We've got you covered! Each kit includes a 1/8 inch - 27 NPT high carbon steel taper pipe tap and a high-quality matching drill bit. Grab one of these kits when installing gauges, performance electronics that require EGT probes, and any other sender, probe or nozzle that requires 1/8 inch NPT threads.
Features:

• 1/8 inch - 27 NPT Tap and Bit
• Perfect For EGT Probes and More
• Resharpenable Drill Bit For Multiple Uses

NPT Hex Socket Plug - Black

Neoprene Hose - Braided Cloth Black. To be used with Reusable Fittings only. Not to be used with hose barb or push lock hose.
Details:

• 10 Foot
• Neoprene
• Braided Cloth
• Black

High Pressure Fuel Line 8mm x 3.5mm Line, M14 x 1.5 Nuts. Fabricators and Engine Builders, here are the fuel lines you've been looking for at an affordable price. Don't mess with bending factory lines to fit your custom setup anymore.

These lines are OEM quality and give you a blank slate to create a great looking and reliable high pressure fuel system.
Details:

• 10 Inch
• 8mm x 3.5mm Line M14 x 1.5 Nuts

High Pressure Fuel Line 8mm x 3.5mm Line, M14 x 1.5 Nuts. Fabricators and Engine Builders, here are the fuel lines you've been looking for at an affordable price. Don't mess with bending factory lines to fit your custom setup anymore.

These lines are OEM quality and give you a blank slate to create a great looking and reliable high pressure fuel system.
Details:

• 11 Inch
• 8mm x 3.5mm Line M14 x 1.5 Nuts

High Pressure Fuel Line 8mm x 3.5mm Line, M14 x 1.5 Nuts. Fabricators and Engine Builders, here are the fuel lines you've been looking for at an affordable price. Don't mess with bending factory lines to fit your custom setup anymore.

These lines are OEM quality and give you a blank slate to create a great looking and reliable high pressure fuel system.
Details:

• 12 Inch
• 8mm x 3.5mm Line M14 x 1.5 Nuts

Cummins Coolant Bypass Kit. Another product from Fleece Performance built out of necessity is the 2003-2016 Cummins Coolant Bypass kit. The Cummins engine cooling system was designed to adequately cool a 300-350hp engine.

When the horsepower is increased there is an increased demand on the cooling system. The rear cylinders suffer from a lack of coolant flow, and therefore, experience the highest coolant temperatures. This can cause excessive pressure to build in the system, especially the rear of the block and possibly blow out freeze plugs externally, or the smaller diameter plugs under the valve cover, leading to a failure.

We’ve designed our coolant bypass kit with a secondary thermostat, that unlike other brands, works based on temperature instead of excessive pressure. This solves the problem before pressure becomes an issue by ensuring consistent temperatures across all six cylinders. Our kit comes with high quality AN o-ring fittings and AN hose connections with braided hose to ensure a leak free installation.

The 2003-2007 5.9L automatic transmission version will eliminate the factory transmission fluid heat exchanger. The heat exchanger is not a fluid cooler; it was designed for use in cold climates to warm the transmission fluid with the engine coolant. It is not necessary for use in warm climates or high horsepower applications, nor does it detrimentally affect the trucks performance when removed.
All 2007-2016 6.7 trucks, both automatic and manual equipped transmissions, do not have a transmission fluid heat exchanger.

For customers with a 6.7L that has a heat exchanger, You will need a heater tube it can be purchased at your local Chrysler Dealership PN:68048997AA. It is very rare that a 6.7L has a heat exchanger, but we have had a few instances where it has been needed.

High Pressure Fuel Line 8mm x 3.5mm Line, M14 x 1.5 Nuts. Fabricators and Engine Builders, here are the fuel lines you've been looking for at an affordable price. Don't mess with bending factory lines to fit your custom setup anymore.

These lines are OEM quality and give you a blank slate to create a great looking and reliable high pressure fuel system.
Details:

• 13 Inch
• 8mm x 3.5mm Line M14 x 1.5 Nuts

High Pressure Fuel Line 8mm x 3.5mm Line, M14 x 1.5 Nuts. Fabricators and Engine Builders, here are the fuel lines you've been looking for at an affordable price. Don't mess with bending factory lines to fit your custom setup anymore.

These lines are OEM quality and give you a blank slate to create a great looking and reliable high pressure fuel system.
Details:

• 14 Inch
• 8mm x 3.5mm Line M14 x 1.5 Nuts

High Pressure Fuel Line 8mm x 3.5mm Line, M14 x 1.5 Nuts. Fabricators and Engine Builders, here are the fuel lines you've been looking for at an affordable price. Don't mess with bending factory lines to fit your custom setup anymore.

These lines are OEM quality and give you a blank slate to create a great looking and reliable high pressure fuel system.
Details:

• 15 Inch
• 8mm x 3.5mm Line M14 x 1.5 Nuts